Candy GCC590NB stuck on pause

[ASB1960]

On trying any program the pause light flashes. This is the only light lit in any way.

Pressing start there is a long beep, no apparent attempt to start and the pause light restarts flashing.

If I press and hold the start button for a few second then all the lights flash 3 times.

If this is E3 (and I am unsure) then this appears to be a water full condition (the light is not lit). The resevoir is empty not full and appears well seated.

Any suggestions as to where the problem may lie.

Thanks.

[kaibart]

The 1st thing to check would be connections on the door lock and the door lock itself